Poweramp CM SERIES MECHANICAL Bedienungsanleitung PDF herunterladen (Seite 20)

4111-0006 — Sept 2010

Sept 2012

OPERATION

Operating Instructions

The dock leveler operation instructions are

divided into the two methods of loading and

unloading:

• Forramploadingandunloading,seeRamp

Loading/Unloading Instructions on page 19.

• Forendloadingandunloading,seeEnd

Loading/Unloading Instructions on page 20.

Stay clear of dock leveler when freight carrier is

entering or leaving dock area.

DO NOT raise or lower the dock leveler if anyone is

under or in front of leveler.

Keep hands and feet clear of pinch points. Avoid

putting any part of your body near moving parts.

Failure to follow these instructions may result in

severe personal injury or death.

The CM-series mechanical dock leveler is designed

to compensate for ± 12 in. (305 mm) of height

difference between the loading dock and the truck

bed. DO NOT use the dock leveler if the truck/trailer

bed is more than 12 in. (305 mm) higher or lower

than the dock floor.

DO NOT overload the dock leveler.

DO NOT operate any equipment while under the

influence of alcohol or drugs.

DO NOT leave/store equipment or material

unattended on the dock leveler.

Failure to follow these instructions may result in

personal injury and/or damage to equipment.

DO NOT activate the dock leveler until the truck/

trailer is positioned squarely against the bumpers

and the truck wheels are chocked.

Never remove the wheel chocks until loading and

unloading is finished and truck driver has been

given permission to leave.

DO NOT use the dock leveler if the freight carrier is

too high or too low.

NEVER use a fork truck or any other material

handling equipment to lower the dock leveler.

DO NOT drive any equipment onto the dock leveler

until platform lip is resting on the truck/trailer with at

least 4 in. (102 mm) of overlap.

Always maintain a safe distance from side edges of

leveler during the loading and unloading process.

NEVER attempt to walk on an unsupported lip.

NEVER allow untrained personnel to operate the

dock leveler.

NEVER attempt to lift any part of the leveler by

hand.

Failure to follow these instructions may result in

serious personal injury or death.

IMPORTANT

When activating the leveler, always pull AND hold

the platform release ring until the platform is at the

full-raised position. Releasing the ring while the

platform is still rising may result in damage to the

equipment.

12 in. (305 mm)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Poweramp CM SERIES MECHANICAL Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hissen Poweramp CM SERIES MECHANICAL